Rubber wood, good material density and clear wood grain. Thai rubber wood adopts steam drying technology. The drying of the material is basically controlled by 6%-8% in 9-12 days of drying; the small material finger joint technology ensures that the integrated sheet is not deformed, due to the characteristics of easy moisture absorption of wood. The spliced plates have different upper arch bending deformations under specific humidity conditions; at present, the finger-joining plate manufacturers use high-quality environmentally-friendly products for splicing glue; the various specifications of solid wood laminated materials are processed and produced with high quality.
aterial finger joint technology ensures that the integrated sheet is not deformed, due to the characteristics of easy moisture absorption of wood. The spliced plates have different upper arch bending deformations under specific humidity conditions; at present, the finger-joining plate manufacturers use high-quality environmentally-friendly products for splicing glue; the various specifications of solid wood laminated materials are processed and produced with high quality.
Widely used in residential, villas, hotels, hotels, office buildings, solid wood doors, solid wood furniture, solid wood stairs and various decorative projects. It is the best choice for modern fashion decoration and decoration.
The level of the fingerboard is generally divided into the following three levels:
Note: AA: no dead cockroaches on both sides, no rot, no wormhole, no cracking, no ash filling, sanding and smoothing
AB: The A side is the same as the AA board. The B side has dead cockroaches, rotten board surface, and there is ash filling (flattening the board surface with ash).
AC: There are dead cock
roaches on both sides, there are rot, wormholes, bark, ash on both sides, sanding and smoothing
Some manufacturers have another level in the AB/AC level. The joint board, that is, the two boards are all white, and there is no dead black.
The country’s largest rubber wood production area is the Pearl River Delta region of Guangdong Province, which accounts for more than 80% of the country’s total production; the largest production base in the Pearl River Delta is more than 60% of the Shunde District.
Thai rubber wood brand material suppliers: APK, SSP, Pacific, Asia (red elephant), UN, TS…
Note: 1. The finger joint plate is not as good as imagined. Pay attention to the quality of the glue used. If the glue is used improperly, it will cause formaldehyde pollution. 2. The above grades are the internal control standards for enterprise product quality adopted by rubber wood finger joint board wood producers.
Rubber wood, good material density and clear wood grain. Thai rubber wood adopts steam drying technology. The drying of the material is basically controlled by 6%-8% in 9-12 days of drying; the small material finger joint technology ensures that the integrated sheet is not deformed, due to the characteristics of easy moisture absorption of wood. The spliced plates have different upper arch bending deformations under specific humidity conditions; at present, the finger-joining plate manufacturers use high-quality environmentally-friendly products for splicing glue; the various specifications of solid wood laminated materials are processed and produced with high quality.
aterial finger joint technology ensures that the integrated sheet is not deformed, due to the characteristics of easy moisture absorption of wood. The spliced plates have different upper arch bending deformations under specific humidity conditions; at present, the finger-joining plate manufacturers use high-quality environmentally-friendly products for splicing glue; the various specifications of solid wood laminated materials are processed and produced with high quality.
Widely used in residential, villas, hotels, hotels, office buildings, solid wood doors, solid wood furniture, solid wood stairs and various decorative projects. It is the best choice for modern fashion decoration and decoration.
The level of the fingerboard is generally divided into the following three levels:
Note: AA: no dead cockroaches on both sides, no rot, no wormhole, no cracking, no ash filling, sanding and smoothing
AB: The A side is the same as the AA board. The B side has dead cockroaches, rotten board surface, and there is ash filling (flattening the board surface with ash).
AC: There are dead cock
roaches on both sides, there are rot, wormholes, bark, ash on both sides, sanding and smoothing
Some manufacturers have another level in the AB/AC level. The joint board, that is, the two boards are all white, and there is no dead black.
The country’s largest rubber wood production area is the Pearl River Delta region of Guangdong Province, which accounts for more than 80% of the country’s total production; the largest production base in the Pearl River Delta is more than 60% of the Shunde District.
Thai rubber wood brand material suppliers: APK, SSP, Pacific, Asia (red elephant), UN, TS…
Note: 1. The finger joint plate is not as good as imagined. Pay attention to the quality of the glue used. If the glue is used improperly, it will cause formaldehyde pollution. 2. The above grades are the internal control standards for enterprise product quality adopted by rubber wood finger joint board wood producers.
